Events


PARTICIPATION IN CONFERENCES

 

  1. 1. IV European Conference on Computational Mechanics – ECCM 2010, Paris (France), 16–21 May 2010:
    a) Presentation: T. Sadowski - “Multiscale modeling of gradual degradation in Al2O3/ZrO2 ceramic composites under compression”
    b) T. Sadowski was co-organiser of the Mini-symposium: “Multiscale and multiphysics computational methodologies for complex materials”  Conference: “

 

2. Aspects of fracture and cutting mechanics of materials”, Kazimierz Dolny (Poland), 21–23 October 2010:

a) Presentation on main ideas of the project: J. Sadowska -  „Centre of Excellence for Modern Composites Applied in Aerospace and Surface Transport Infrastructure” CEMCAST  FP7 - 245479

b) 5 presentations prepared within the CEMCAST were given by 3 researchers from the Lublin University of Technology: T. Sadowski, E. Zarzeka-Raczkowska, P. Golewski  and 2 recruited researchers: I. Ivanov (Bulgaria)  and V. Burlayenko (Ukraine).

 

3. IUTAM Symposium on Nonlinear Dynamics for Advanced Technologies and Engineering Design, NDATED, Aberdeen, (UK) , 27-30 July 2010: 

a) Presentation: J. Warminski, M. Bochenski, W. Jarzyna, P. Filipek, M. Augustyniak – “Active Suppression of Nonlinear Oscillations by Application  PPF And Saturation Controllers: Analytical Investigation And Experimental Verification”
b) Presentation: “M. Keber, M. Wiercigroch, J. Warmiński – „Reduced order  model of a riser subjected to vortex-induced vibration“

 

4. International Workshop on Computational Mechanics of Materials - IWCMM 20,   Loughborough (United Kingdom), 8-10 September 2010:

a) Presentation: V.N. Burlayenko, T. Sadowski – “A numerical study of dynamic responses of sandwich plates initially damaged by low velocity impac”

b) Presentation: T. Sadowski, P. Golewski – “The influence of quantity and the distribution of cooling channels of turbine blades on the stresses level in the protective layer TBC and the efficiency of cooling”

 

5. Computer Methods in Mechanics, CMM 2011, Warsaw (Poland), 9-12 May 2011:

a) Presentation: T. Sadowski, L. Marsavina, E. Craciun – “Parallel cracks propagation in orthotropic polymer matrix composite subjected to tension”

 

6. 8th National Rotorcraft Forum 2011, Warsaw (Poland), 17.06.2011:

a) Presentation: E. Manoach, S. Samborski, J. Warmiński – “Vibration and damage detections of composite beams with delamination”

b) Presentation: F. Georgiadis, J. Warmiński – “Excitation of a localized nonlinear normal mode of a bladed disk assembly lump mass nonlinear model”

c) Presentation: J. Latalski, F. Georgiadis, J. Warmiński – “Mode shapes variation of a composite beam with piezoelectric patches”

 

7. 8th International Conference on Structural Dynamics, EURODYN 2011, Leuven (Belgium), 4-6.07.2011:

a) Presentation: I. Ivanov, T. Sadowski – “Mechanical response of laminated glass subjected to low-velocity impact”

b) Presentation: V. Burlayenko, T. Sadowski – “ Numerical modeling of dynamics of sandwich plates with partially debonded skin-to-core interface for damage detection”

 

  1. 8. 7th European Nonlinear Dynamics Conference, ENOC 2011,  Rome (Italy), 24-29.07.2011:

a) Presentation: V. Burlayenko, T. Sadowski – “Post-impact dynamic response of sandwich plates with foam and non-metallic honeycomb cores”

b) Presentation: J. Warmiński, G. Rega, J. Latalski - “Nonlinear phenomena in a suspended cable under parametric and external excitations”

c) Presentation: G. Litak, J. Sawicki – “Regular and chaotic vibrations in the rub impact model of a Jeffcott rotor”

 

9. 21st International Workshop on Computational Mechanics of Materials, IWCMM 21, Limerick (Ireland), 21-24.08.2011:

a) Presentation: T. Sadowski - “Gradual degradation in two-phase composites under compression”

b) Presentation: H. Dębski, J. Bieniaś, B. Surowska, T. Sadowski - “Microstructure failure analysis of carbon/epoxy composites using FEA”

c) Presentation: V. Petrova, T. Sadowski  - “An asymptotic analytical analysis of interaction of two cracks under mode II loading”

d) Presentation: G. Golewski, P. Golewski, T. Sadowski - “3-D crack propagation under fracture mode II in cement concrete containing fly-ash additive”

 

10.  EUROMECH Colloquium 527-Shell-like Structure-Nonclassical Theories and Applications, Leucorea Lutherstadt Wittenberg (Germany), 22-26.08.2011:

a) Presentation: I. Ivanov, D. Velchev, T. Sadowski, M. Kneć - “Computational models of laminated glass plate under transverse static loading”

b) Presentation: V. Burlayenko, T. Sadowski - “Dynamic analysis of debonded sandwich plates with flexible core-numerical aspects and simulation”

c) Presentation: M. Birsan, H. Altenbach – “Analysis of the deformation of multi-layered orthotropic cylindrical elastic shells using the direct approach”

 

11. 2nd Congress of Polish Mechanics, Poznań (Poland), 28 – 31.08.2011  

a) Presentation: J. Latalski, F. Georgiadis, J. Warmiński – “Dynamic analysis of a rotating composite beam with an embedded active element”

 

12. 2 nd International Conference on Material Modelling, ICMM 2011, Paris (France), 31.08-2.09.2011:

a) Presentation: T. Sadowski, M. Birsan, D. Pietras – “Mechanical behavior of composite rods made of foam and functionally graded materials”

 

13.  International Conference on Vibration Problems, ICOVP 2011, Prague (CzechRepublic), 5-8.09.2011:

a) Presentation: E. Manoach, S. Samborski, J. Warmiński - “Delamination detections of laminated nonlinear vibrating and thermally loaded beams”

 

14. 4th International Conference on Structural Analysis of Advanced Materials,  ICSAAM 2011, Sinaia (Romania), 7-11.09.2011:

a) Presentation: T. Sadowski, M. Boniecki, Z. Librant, S. Ataya – „Heat transfer and cracks propagation in monolithic oxide and FGM ceramics under non-symmetric thermal shock”

 

15. . Advanced Materials and Structures, AMS 2011, Timisoara (Romania), 27-28.10.2011:

a) Presentation: G. Golewski, T. Sadowski - “Experimental investigation and numerical modeling fracture processes under mode II in concrete composites containing fly-ash additive at early stage”

b) Presentation: T. Sadowski, M. Kneć -  “Experimantal study of biomaterial Iosipescu shear strength and strain concentrations using digital image correlation

system”

 

16. “Advanced Materials and Structures” AMS 11”, 27-28 October  2011, Timisoara (Romania)

a) Presentation (at poster session): “Experimental Investigation and Numerical Modelling Fracture Processes under Mode II in Concrete Composites containing Fly-Ash Additive at Early Age” –  G. Golewski, T. Sadowski

 b) Presentation: “Experimental Study of Bimaterial Iosipescu Shear Strength and Strain Concentrations Using Digital Image Correlation System”T. Sadowski, M. Kneć

 

17. “4th International Conference on Localization, Energy Transfer and  Nonlinear Normal Modes in Mechanics and Physics” NNM2012, 1-5 July 2012, Haifa  (Israel)

a) Presentation: “Nonlinear Normal Modes of Coupled Nonlinear Self-Excited Oscillators” -   J. Warminski                                                                                                    

b) Presentation: ‘Nonlinear Modal Analysis of an L-Shape Beam Structure’ – F. Georgiades,. J.Warminski,  M. P. Cartmell                                                                        

 

18. “6th International Conference on Advanced Computational   Engineering and Experimenting” ACE-X2012, 1-4 July 2012, Istanbul (Turkey)

a) Presentation: “X-ray Computed Microtomography Analysis of Polymer Foam Structure Deformation During Compression” – B. Surowska, M. Ostapiuk, J. Bieniaś, R. Pyrz

 

19.  “The 8th European Solid Mechanics Conference”, 9-13. July 2012, Graz (Austria)

a) Presentation (at poster session): “Chaotic Vibrations of the Duffing System with Fractional Damping” -  G. Litak, A. Syta, S. Lenci, M. Scheffler

b) Presentation: “Dynamics and Fault Localization of Composite Beams with Delamination” –   E. Manoach, A. Mitura, J. Warmiński, S. Samborski                    

 

20. “19th European Conference on Fracture”, 26-31 August 2012, Kazań (Russia)

a) Presentation: “Compact Shear Specimen For Mode II Fracture Tests: Theoretical Modeling and Analysis” - V. Petrova, T. Sadowski

 

21.  “1st EUROMECH Colloquium on Time-periodic Systems – Current Trends in Theory and Applications”, 27-30 August 2012, Frankfurt (Germany)

a) Presentation: “Parametric vibrations of a thin-walled composite column” -  J. Warminski, A. Teter

 

22. “Modern Practice in Stress and Vibration Analysis”, MPSVA 2012,  29-31 August, Glasgow (UK)

a) Presentation: ‘Linear modal analysis of L-shaped beam structures - parametric studies’ – F. Georgiades, J.Warminski, M. P. Cartmell                                                                                                                              

b) Presentation: ”Rational Placement of a Macro Fibre Composite Actuator in Composite Rotating Beams” – J. Latalski,  F. Georgiades,  J. Warminski

c) Presentation: “Optimal control methods for vertical and horizontal beam dynamics” – A. Mitura, J. Warmiński, M. Bocheński       

d) Presentation: “Chatter Control in Milling Process of Composite Materials” –  R. Rusinek, K. Kęcik, A. Weremczuk,  J. Warminski     

e) Presentation: “Nonlinear phenomena in mechanical systems dynamics” – J. Warmińsk

23.  „European Congress on Computational Methods in Applied Sciences and Engineering” ECCOMAS 2012, 10-14 September 2012, Wien (Austria)

a) Presentation: “Dynamic Debonding Propagation Analysis OF Sandwich Plates” - V.N. Burlayenko,  T. Sadowski   

b) Presentation: “Theoretical modelling and analysis of mode II cracks in compact shear specimens” - V. Petrova, T. Sadowski

24. “The 4th International Conference on “Crack Paths”, CP2012, 19 – 21.September.2012, Gaeta, (Italy)

a) Presentation: “Crack Paths propagation under Mode II  in Concrete Composites containing Fly-Ash Additive” –  G. Golewski, P. Golewski, T. Sadowski  

 


VISITS

 

  Visits of LUT staff in twinning institutions:

 

  • In Martin Luther University (MLU) and then Otto-von-Guericke-University Magdeburg (OGUM), Germany - 5 visits: 7.03 – 6.04.2011, 10.04 – 24.04.2012, 1.06 – 30.06.2012, 16.07 – 15.08.2012, 27.01 – 9.02.2013
  • In University of Aberdeen (UA), United Kingdom – 7 visits: 26.07 – 8.08.2010, 26.04 – 9.05.2011. 10.10 – 9.11.2011 (2 visitors), 11.08 – 01.09.2012, 3.02 – 24.02.2013 (2 visitors)
  • In University of Roma "La Sapienza" (URS), Italy – 7 visits: 10.07 – 30.07.2011, 23.07 – 5.08.2011, 12.09 – 25.09.2012, 20.01 – 19.02.2013, 03.02. – 24.02.2013, 3.03 – 16.03.2013, 3.03 – 24.03.2013
  • In Polytechnic University Marche (PUM), Italy – 6 visits: 4.10 – 4.11.2010, 1.07 – 31.07.2011, 21.05 – 20.06.2012 (2 visitors), 22.07 – 12.08.2012, 9.02 – 11.03.2013
  • In University of Stuttgart (US), Germany – 6 visits: 10.07 – 31.07.2010, 15.08 – 14.09.2010, 1.07 – 31.07.2011, 16.01 – 15.02.2012 (2 visitors), 16.05 – 15.06.2012 
  • In University of Porto (UPP), Portugal – 6 visits: 30.06 – 13.07.2011, 2.09 – 22.09.2011 (2 visitors), 19.06 – 10.07.2012 (2 visitors), 26.01 – 8.02.2013 
  • In University of Aalborg (UA, Denmark) – 2 visits: 27.04 – 26.05. 2012 (2 visitors)
  • In University of Glasgow (UG), United Kingdom - 4 visits: 27.05 – 09.06.2012, 6.06 – 5.07.2012 (2 visitors), 29.07 – 11.08.2012
  • To University Politehnica Timisoara (UPT), Romania - 2 visits: 13.06 – 15.07.2012 (2 visitors) 
  • In National Technical University of Athens (NTUA), Greece – 1 visit: 01.07 – 31.08.2012In University of Russe (UR), Bulgaria – 2 visits: 01.08 – 31.08.2012 (2 visitors)

 

 

 

 

  Visits from twinning institutions to LUT:

 

  1. From Martin Luther University (MLU) and then Otto-von-Guericke-University Magdeburg (OGUM),  Germany - 6 visits: 11.07 – 5.08.2011 (2 visitors), 30.01 – 29.02.2012 (2 visitors), 17.10 – 15.11.2012 (2 visitors)
  2. From University of Aberdeen (UA), United Kingdom – 5 visits: 6.08 – 16.08.2010 (2 visitors), 14.10 – 27.10. 2012 (2 visitors), 15.03 – 22,03.2012
  3. From University of Roma “La Sapienza” (URS), Italy – 7 visits: 27.02 – 12.03.2011, 15.03 – 25.03.2012, 09.07 – 14.07.2012, 21.10 – 27.10. 2012, 07.02 – 16.02.2013, 24.02 – 03.03.2013 (2 visitors)
  4. From Polytechnic University Marche (PUM), Italy – 3 visits: 30.01 – 12.02.2011, 07.11 – 12.11.2011, 21.01 – 26.01.2013
  5. From University of Stuttgart (US), Germany – 4 visits: 10.04 – 10.05.2011, 18.03 – 22.03.2012, 12.08 – 18.08.2012, 27.02 – 06.03.2013
  6. From University of Porto (UPP), Portugal – 5 visits: 06.02 – 16.02.2011, 23.10 – 02.11.2011, 29.04 – 16.05.2012, 21.10 – 28.10. 2012, 19.03 – 29.03.2013
  7. From Politechnica University of Timisoara (PUT), Romania – 4 visits: 20.01 – 19.02.2011, 1.08 – 31.08.2011, 15.07 – 14.08.2012, 16.01 – 15.02.2013
  8. From University of Rousse (UR), Bulgaria – 5 visits: 1.08 – 31.10.2010, 20.06 – 18.09.2011, 08.01 – 07.02.2012, 17.09 – 27.10.2012, 07.01- 25.01.2013
  9. From University of Aalborg (UA, Denmark) –  3  visits: 06.11 – 12.11.2011, 17.10 – 26.10.2012, 03.02 – 10.02.2013
  10. From University of Glasgow (UG), United Kingdom – 1 visit: 04.12 – 09.12.2012
  11. From Ovidius University of Constanta (OUC), Romania – 3 visits: 1.08 – 15.08.2011, 30.01 – 13.02.2012, 29.07 – 13.08.2012
  12.  From Chemnitz University of Technology (CUT), Germany – 1 visit: 17.03 – 22.03.2012 

 

 

Total number of outgoing visits (from LUT) : 44

Total number of incoming visits (to LUT):  48

 

 

ORGANISATION OF SCIENTIFIC EVENTS


2010

1. Mini-symposium on “Multiscale and Multiphysics Computational Methodologies  for Complex Materials” at IVth European Conference on Computational Mechanics, 16-21 May 2010, Paris (France)

    Organizers: Prof. T. Sadowski (CEMCAST coordinator), Prof. P. Trovalusci (twinning partner, University of Rome „La Sapienza”), Prof. V.Sansalone (France), Prof. B.Schrefler (Italy).

2. IUTAM Symposium on Nonlinear Dynamics for Advanced Technologies and Engineering Design (NDATED), 27-30 July 2010, Aberdeen (UK) was organized by the project twinning partners.

    Chairman:  Prof. M. Wiercigroch (University of Aberdeen), Co-chairman: Prof. G. Rega (University of Rome „La Sapienza”).

 

2012

 

3. Course: “MULTISCALE MODELLING OF COMPLEX MATERIALS” organized in the International Centre for Mechanical Sciences (CISM), 21-25 May 2012, Udine (Italy),

    Organizers: Prof. T. Sadowski (coordinator of CEMCAST) and Prof. P.Trovalusci (from twinning institution – University  of Rome “La Sapienza”)

4. Poster session organised at the conference “Modern Practice in Stress and Vibration Analysis”, MPSVA 2012, 29 – 31 August, Glasgow (UK)

    Organiser: Prof. J. Warminski

5. Symposium (No: MS 622) on: “MULTISCALE AND  MULTIPHYSICS MODELLING FOR COMPLEX MATERIALS”  organised within  6th European Congress on Computational Methods in Applied Sciences and Engineering, 10-14 September, 2012; Wien (Austria).

     Organizers: Prof. T. Sadowski (coordinator of CEMCAST), Prof. P. Trovalusci (from twinning institution:  University of  Rome “La Sapienza”), Prof. R. de Borst (expert in CEMCAST, The Netherlands), Prof. B.Schrefler (Italy).

6. Workshop on „Dynamics of Functionally Graded Materials and Systems with Hysteresis”, 19 March, 2012, Lublin (Poland)

     Organizer: Prof. Grzegorz Litak

7. Workshop on „Effects on Nonlinearities in Energy Harvesting”, 6 July, 2012, Lublin (Poland)

     Organizer: Prof. Grzegorz Litak

8. Workshop on „Nonlinear Dynamics Phenomena in Mechanical, Aerospace and Civil Engineering”, 22-23 October, 2012, Lublin (Poland)

     Organizer: Prof. Jerzy Warmiński   

 

PROJECT ACHIEVEMENTS (PUBLICATIONS)

 


Composite materials group - Chapters in books (2010):

1. Burlayenko V.N. and Sadowski T., (2010): Aspects of fracture and cutting mechanics of materials - FE modeling of dynamics of impact damaged sandwich plates with intermittent CONTACT in detached fragments, Lublin Scientific Society, 2010, ISBN 978-83-62025-08-4, 6, 71-  79.

2. Ivanov I.V. and Sadowski T., (2010): Aspects of fracture and cutting mechanics of materials –Numerical investigation of laminated glass impact, Lublin Scientific Society, 2010, ISBN 978-83-62025-08-4, 7, 81-87.


Chapters in books (2011):


3. Sadowski T., Balawender,T. (2011): Technology Clinch-Adhesive Joints, in “Hybrid Adhesive Joints” Springer-Verlag (Eds: L.da Silva, A.Pirondi, A.Oechsner)

4. Burlayenko V., Sadowski,T. (2011): Numerical Modeling of Sandwich Plates with Partially Debonded Skin-to-Core Interface for Damage Detection”,  in „Shell-like structures, Advanced Structured Materials”, Springer-Verlag (Eds: H.Altenbach, V.Ermeyev), vol.15, part 5, 415-440.

5. Ivanov I., Sadowski T., (2010): Mechanical Response of Laminated Glass Subjected to Low Velocity Impact, in „Shell-like structures, Advanced Structured Materials” Springer-Verlag (Eds: H.Altenbach, V.Ermeyev), vol. 15, 489-490

6. Birsan M., Altenbach H., „Analysis of the deformation of multi-layered orthotropic cylindrical elastic shells using the direct approach” in „Shell-like structures, Advanced Structured Materials”, Springer-Verlag (Eds:H.Altenbach, V.Ermeyev), vol.15, 29-52.

Chapters in books (2012):

7. M. Boniecki, Z. Librant, T. Sadowski, W. Wesołowski, „The Thermal Shock Resistance and Mechanical Properties at Elevated Temperature of Transparent Ceramics”, Materials with Complex Behaviour II, Advanced Structured Materials, 2012, Vol. 16, Part 2, 307-321 Springer –Verlag (Eds: A.Oechsner, L.da Silva, H.Altenbach).

8. M. Birsan, T. Sadowski, D. Pietras „Cylindrical orthotropic thermoelastic shells modelled by direct approach”, Encyclopedia of Thermal Stress (edit. R.Hetnarski) Springer, (in print – will be published in July 2013)

Composite materials group - Publications 2010

1. Marsavina L., Sadowski T., Faur N., (2010): “Asymptotic stress field for a crack normal to a ceramic – metal interface”, Key Eng. Materials, 417-418, 489-492.

2. Burlayenko V., Sadowski T.,(2010): “Effective elastic properties of foam-filled honeycomb cores of sandwich panels”, Composite Structures 92, 2890-2900.

3. Ivanov I., (2010) „Finite Element analysis and modelling of active fibre composites including damages”, Computational Materials Sciences, vol.50, Issue 4, 1276 – 1282.

4. Marsavina L., Sadowski T., Kneć M., Negru R.,(2010): "Non-Linear Behavior of Foams under Static and Impact Three Point Bending", Int. J. Non-Linear Mechanics 45, 969-975


Composite materials group - Publications 2011


1. Marsavina L., Sadowski T., Faur N.,(2011): “Numerical investigation of the stress field near a crack normal to ceramic-metal interface”, J. Mechanical Sci. and Technology 25, 309-315.

2. Postek E., T Sadowski.,(2011): “Assessing the Influence of Porosity in the Deformation of Metal-Ceramic Composites”, Composite Interfaces 18, 57-76.

3. Burlayenko V., Sadowski T.,(2011): “Dynamic behavior of sandwich plates containing single/multiple debonding”, Comput. Mat. Sci. 50, 1263-1268.

4. Sadowski T., Golewski P.,(2011): "Multidisciplinary analysis of the operational temperature increase of turbine blades in combustion engines by application of the ceramic thermal barrier coatings (TBC)" Comput. Mat. Sci. 50, 1326-1335.

5. Sadowski T., Marsavina L.,(2011): "Multiscale modelling of two-phase ceramic matrix composites„ Comput. Mat. Sci. 50, 1336-1346.

6. Sadowski T., Bec J.,(2011): "Effective properties for sandwich plates with aluminium foil honeycomb core and polymer foam filling - static and dynamic response",  Comput. Mat. Sci. 50, 1269-1275.

7. Ivanov. I., Velchev D., Sadowski T., Kneć M., (2011): „Computational models of laminated glass plate under transverse static loading”, Shell-like Structures Non-clasical Theories and Applications, Advanced Structured Materials (Springer - Verlag), vol.15, (2011), part  5, 469-490

8. Lenci S., Piattoni Q., Clementi F., Sadowski T., „An experimental study on damage evolution of unfired dry earth under compression”, Int. J. Fracture,  vol. 172, (2011) 193 – 200


Composite materials group - Publications 2012

1.  Birsan M., Altenbach H., Sadowski T., Eremeyev V., Pietras D., „Deformation  analysis of functionally graded rods by the direct approach, Comp. Part B Engineering, 43 (2012), 1315 – 1328

2. Sadowski T., Marsavina L., Craciun E.-M., Knec M., “Modelling and experimental study of parallel cracks propagation in an orthotropic elastic material”, Comput. Mat. Sci. 52 (2012), 231 - 235

3. Burlayenko V., Sadowski T., “A numerical study of the dynamic response of sandwich plates initially damaged by low-velocity impact”, Comput. Mat. Sci. 52 (2012), 212 – 216

4. L. Marsavina, A.D. Nurse, L. Braescu, E.M. Craciun, “Stress singularity of symmetric free- edge joints with elasto-plastic behavior, Comput. Mat. Sci. 52 (2012), 282-286.

5. G. Golewski, P. Golewski, T. Sadowski, “Numerical modeling crack propagation under Mode II fracture in plain concretes containing siliceous fly-ash additive using XFEM method, Comput. Mat. Sci. 62 (2012), 75-78.

6. V. Petrova, T. Sadowski, “Theoretical analysis of Mode II cracks in a compact shear specimen, Comput. Mat. Sci. 64 (2012), 248-252.

7. E. Linul, L. Marsavina, T. Sadowski, M. Kneć, “Size effect on fracture toughness of rigid polyurethane foams”, Solid State Phenomena, Vol. 188 (2012), 205-210.

8. T. Sadowski, M. Kneć, “Experimental study of biomaterial shear strength and strain concentrations by losipescu based test using digital image correlation system”, Solid State Phenomena, Vol. 188 (2012), 226-231.

9. G. Golewski, T. Sadowski, “Experimantal investigation and numerical modeling fracture processes under Mode II concrete composites containing fly-ash additive at early age”, Solid State Phenomena, Vol. 188 (2012), 158-163.

10. S. Lenci, F. Clementi, T. Sadowski, “Experimental determination of the fracture properties of unfired dry earth”,  Engineering Fracture Mechanics 87 (2012), 62-72.

11.V. Burlayenko, T. Sadowski, “Finite element nonlinear dynamic analysis of sandwich plates with partially detached facesheet and core”, Finite Elements in Analysis and Design 62 (2012), 49-64.

12. T. Sadowski, „Gradual degradation in two-phase ceramic composites under compression”, Computational Materials Science 64 (2012), 209 – 211.

13. T. Sadowski, P. Golewski, „Detection and numerical analysis of the most efforted places in turbine blades under real working conditions”, Computational Materials Science 64 (2012), 285 – 288.

14. J. Bieniaś, H. Dębski, B. Surowska, T. Sadowski, „Analysis of microstructure damage in carbon/epoxy composites using FEM”, Computational Materials Science 64 (2012), 168 – 172.

15. V. Petrova, L. Marsavina, T. Sadowski, „Revisit of compact Mode II crack specimen: Analysis and fracture interpreparation”, Theoretical and Applied Fracture Mechanics 59 (2012), 41 – 48.


Composite materials group - Publications 2013

1.  M. Birsan, T. Sadowski, L. Marsavina, E. Linul, D. Pietras, „Mechanical behaviour of sandwich composite beams made of foams and functionally graded materials”, Int. Journal of Solids and Structures 50 (2013), 519 – 530.

 2. M. Birsan, T. Sadowski, D. Pietras, “Thermoelastic deformations of cylindrical multi-layered shells using a direct approach”, Journal of Thermal Stress, DOI: 10.1080/01495739.2013.764802.

3. E.-M. Craciun, T.Sadowski, A.Rabaea, „Stress concentration in an anisotropic body with three equal collinear cracks in Mode II of fracture. I. Analytical study” ZAMM (in print)

4. Marsavina L., Sadowski T., Kneć M., “Crack propagation paths in four point bend bi-material specimens”, Engineering Fracture Mechanics (in print)

Composite materials group  - Publications in review - 2013

1.  Marsavina L., Linul E., Voiconi T., Sadowski T., „A comparison between dynamic and static fracture toughness of polyurethane foams”, Polymer Testing (in review)

2. Burlayenko V.N., Sadowski T., “Nonlinear dynamic analysis of harmonically excited debonded sandwich plates using finite element modeling”, Int. J. of Non-linear Mechanics (in review)

3. Burlayenko V.N., Sadowski T., “Transient dynamic response of debonded sandwich plates predicted with the finite element” Int. J Mechanical Sciences (in review)

4. Graziani L., Kneć M., Sadowski T., D’Orazio M., Lenci S., “Measurement of R-curve in clay brick blocks using Optical Measuring Technique’ Journal of Fracture (in review)

5. Pietras D., Ivanov I.V., Sadowski T., Crack propagation In functionally graded strip”, European Physical Journal Special Topics (in review)

6. Marsavina L., Linul E., Constantinescu D.M., Sadowski T., Kneć M., Apostol D., “On fracture toughness of polyurethane foam”, Engineering Fracture Mechanics (in review)

 7. Sadowski T., Birsan M., Pietras D., “Numerical analysis of multilayered and FGM structural elements under mechanical and thermal loads. Comparison of the finite elements and analytical models”, Arch. of Civil and Mechanical Eng. (in review)

 8. Craciun E.-M., Sadowski T., Rabaea A., Marsavina L., „Mathematical modeling of three equal and collinear cracks initiation in an orthotropic solid. Mode I of fracture; case of unequal roots” Applied Mathematical Modelling”, (in review)

 

Dynamics of structures group

Book:

Warmiński, J.; Lenci, S.; Cartmell, M.P.; Rega, G.; Wiercigroch, M. (Eds.) "Nonlinear Dynamic Phenomena in Mechanics", Springer, Series: Solid Mechanics and Its Applications, Vol. 181 1st Edition., 2012, XVI, 276 p. 207 illus., 83 in color, Hardcover, ISBN 978-94-007-2472-3, 2012.

Chapters in this book:

1.  Warmiński J., Kęcik K., „Autoparametric vibrations of a non-linear system with a pendulum and magnetorheological damping”, 1-61.

2.  Catmell M. P., Żak A.J., Ganilova O.A., „Applications for shape memory alloys in structural and machine dynamics”, 115-158.

3.  Rega G. „Theoretical and experimental nonlinear vibrations of sagged elastic cables”, 159-210.

4.  Wiercigroch M., Pavlovskaia E. „Engineering applications of non-smooth dynamics”, 211-273.


Other chapters:


     Manoach E., Samborski S., Warmiński J.,
„ Delamination detections of laminated, nonlinear vibrating and thermally loaded beams”, Proceedings of the 10th International Conference on Vibration Problems, Springer Proceedings in Physics, 139,2011,67-73, ISBN 978-94-007-2068-8.

     J. Warminski, K. Kecik, „Autoparametric vibrations of an nonlinear system with a pendulum and magnetorheological damping”, Nonlinear Dynamics Phenomena in Mechanics, Eds. J. Warminski, S. Lenci, M. P. Cartmell, G. Rega and M. Wiercigroch, 181, 1-62, 2012, Springer (chapter of book).

Dynamics of structures group - Publications 2011

1.  L. Ruzziconi, G. Litak, and S. Lenci, (2011): “Nonlinear oscillations, transition to chaos and escape in the duffing system with non-classical damping”, Journal of Vibrioengineering, 13, 22-38.

2.  G. Litak, R.Rusinek, (2011) “Vibrations in stainless steel turning: multifractal and wavelet approaches”, Journal of Vibroengineering 13, 102-108.

3.  G. Litak, A.Syta, R.Rusinek, (2011) „Dynamical changes during composite milling: recurrence and multiscale entropy analysis”, Int. J. of Advanced Manufacturing Technology 56, 445-453. 

4.  C.A. Kitio Kwuimy, C. Nataraj, G. Litak, (2011) “Melnikov’s Criteria, Parametric Control of Chaos, and Stationary Chaos Occurrence in Systems with Asymmetric Potential Subjected to Multiscale Type Excitation, Chaos 21, 012104.


Dynamics of structures group - Publications 2012


1. G. Litak, J.M. Seoane, S. Zambrano, M.A.F. Sanjuan, “Nonlinear Response of the Mass-Spring Model with Non-Smooth Stiffness”, International Journal of Bifurcation and Chaos, 22 (2012) 1250006

2. F Georgiades, J. Warminski,”Excitation of a Localized Nonlinear Normal Mode of a Bladed Disk Assembly Lump Mass Nonlinear Model”, Transactions of the Institute of Aviation (Warsaw-Poland) ISSN 0509-6669.

3. J. Latalski, F. Georgiades, J. Warminski, „Mode Shape Variation of a Composite Beam with Piezoelectric Patches”, Transactions of the Institute of Aviation (Warsaw-Poland)- ISSN 0509-6669.

4. E. Manoach, S. Samborski, A. Mitura, J. Warminski, “Vibration and Damage Detections of Composite Beams with Defects”,Transactions of the Institute of Aviation (2011), ISSN 0509-6669.

5. E. Manoach, S. Samborski, A. Mitura, J. Warminski, “Vibration Based Damage Detection in Composite Beams under Temperature Variations Using Poincare Maps”, Journal of Mechanical Engineering; Proceedings of the Institution of Mechanical Engineers, part C 62 (2012)

6.  J. Warmiński, A.Teter, „Non-linear parametric vibrations of composite column under uniform compression”, the Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Sciences, 226 (8) 1921 – 1938.

7.  A.Teter, Z. Kołakowski, „Coupled dynamic buckling of thin-walled composite columns with open cross-sections”, Composite Structures 95:28-34;2013.

8.  G. Litak, S. Schubert, G. Radons, „Nonlinear dynamics of a regenerative cutting process”, Nonlinear Dynamics (2012) 69, 1255 – 1262.

9.  M.Gęca, M.Wendeker, G.Litak; Journal of Vibroengineering , Vol 14, ISSUE 2, ISSN 1392-8716, „Combustion variability and uniqueness in cylinders of a large power radial engine”

10.S.Lenci, J.Warmiński Nonlinear Dynamics, DOI 10.1007/s11071-012-0599-4; 2012;, „Free and forced nonlinear oscillations of a two-layer composite beam with interface slip”

11. M. Borowiec, G. Litak, „Transition to chaos and escape phenomenon in two degrees of freedom oscillator with a kinematic excitation”, Nonlinear Dynamics 70, 1125 – 1133 (2012)

12. G.Litak, T.Örd. K.Rägo, A.Vargunin, Band Filling Effects an Coherence Lengths and Penetration Depth in the Two-Orbital Negative – U Hubbard Model of Sueprconductivity”, Physica C , 483, 30-33; (2012)

13. E.Manoach, J.Warmiński, A.Mitura, S.Samborski, „Dynamics of a composite Timoshenko beam with delamination”, Mechanics Research Communications, vol.46, s 47-53, (21012)

14. J.Latalski, F.Georgiades, J.Warmiński, ,, Rational Placement of a Macro Fibre composite Actuator in composite Rotating Beams”, Journal of Physics: Conference Series 382 (2012) 012021

15. P. Ribeiro, H. Akhavan, A. Teter, J. Warminski: „A  review  on  vibrations  and  buckling  of curvilinear  fibre  composite  laminated  panels”, Stability of Structures XIII-th Symposium, Zakopane 17-21.09.2012, pp. 579-88

16. K. Kecik, R. Rusinek R., Warminski J., Weremczuk A. „ Chatter control in the milling process of composite materials”, Journal of Physics: Conference Series 382, 012012, 2012, 1-6, IOP Publishing

17. J. Warminski, K. Kecik, A. Mitura, M. Bochenski, „Nonlinear phenomena in mechanical system dynamics”, Journal of Physics: Conference Series 382, 012012, 2012, 1-6, IOP Publishing

18. C.A. Kitio Kwuimy, G. Litak, M. Borowiec, C. Nataraj, „Performance of a piezoelectric energy harvester driven by air flow”, Applied Physics Letters 100, 024103 (2012).

19. G. Litak, M. I. Friswell, C. A. Kitio Kwuimy, S. Adhikari, M. Borowiec, “Energy harvesting by two magnetopiezoelastics oscillators with mistuning” Theoretical and Applied Mechanics Letters 2, 043009 (2012) (AIP American Institute of Physics). 

20. A. Mitura, J. Warmiński, M. Bocheński, „Optimal control methods for vertical and horizontal beam dynamics”, Journal of Physic: Conference Series, 2012, vol. 382 pp 1-5

21. A.Syta , J.Jonak, Ł.Jedliński, G. Litak; „Failure Diagnosic of a Gear Box by Recurrences Journal of Vibration and Acoustics –Transactions of the ASME; 2012, vol 134/041006-1

22. A.K. Sen, G. Litak, A. Syta, R. Rusinek, „Intermittency and multiscale dynamics in milling of fiber reinforced composites”, Meccanica (2012) doI: 10.1007/s11012-012-9

23. G. Rega, E. Saetta “Shear deformable composite plates with nonlinear curvatures: modelling and nonlinear vibrations of symmetric laminates”, Archives of Applied Mechanics (2012) 82: 1627-1652


Dynamics of structures group - Publications 2013

1.  D. Bernardini, G. Rega, G. Litak, A. Syta, „Identification of regular and chaotic isothermal trajectories  of a shape memory oscillator using the 0-1 test Journal of Multi-Body Dynamics”, Proceedings of the Institution of Mechanical of Mechanical Engineers, Part K 227 (2013) 17-22.

2.  F. Georgiades, J. Warminski, P. M. Cartmell, 2013, „Towards Linear Modal Analysis for an L-Shaped Beam: Equations of Motion”, Mechanics Research Communications, 47, pp 50-60, doi:  10.1016/j.mechrescom.2012.11.005.

3.  F. Georgiades, J. Warminski, P. M. Cartmell, „Linear Modal Analysis of L-Shaped beam Structures”, Mechanical Systems and Signal Processing (in press).

4.  M. Borowiec, G. Litak, M. I. Friswell, S. F. Ali, S. Adhikari, A. W. Lees, O. Bilgen, „Energy Harvesting in Piezoelastic Systems Driven by Random Excitations”, International Journal of Structural Stability and Dynamics (2012) (in press)

 

SUMMARY – publication activities


Books                                1

Books chapters             14

Articles published        59

Articles in press              2

Articles in review            8

 

Articles were published in the following 24 journals:

Computational Materials Science

Journal of Mechanical Science and Technology

Composites Part B Engineering

International Journal of Fracture

Composite Structures

International Journal of Non-Linear  Mechanics

Solids State Phenomena

International Journal of Solids and  Structures

Theoretical and Applied Fracture Mechanics

European Physical Journal Special Topics

ZAMM

Engineering Fracture Mechanics
Key Engineering Materials
Materials Chemistry and Physics
Journal of Vibroengineering
International Journal of Advanced Manufacturing Technology
Chaos
International Journal of Bifurcation and Chaos
Transactions of the Institute of Aviation
Journal of Mechanical Engineering Sciences
Nonlinear Dynamics
ASME Journal of Manufacturing Science and Engineering
International Journal of Mechanical Sciences
Mechanical Research Communications

Copyright © 2010 Politechnika Lubelska
All rights reserved

Login